8 high performance 100BaseFX ports all operating at 100
Mbps for connection to servers and hubs. All ports can be
set to perform 100Mbps half-duplex or full duplex
connections.
Select any of 8 ports for uplink to another switch, hub or
repeater.
Comprehensive LED indicators that display the conditions
of the Switch and status of the network. A description of
these LED indicators follows (see LED Indicators).
Rear Panel
The rear panel of the Switch consists of a power switch, an AC
power connector, an Half/Full Duplex DIP switch and a system
fan. The following shows the rear panel of the Switch.
Figure 4. Rear panel view of the DES-1008FX
System Fans. These fans are used to circulate air inside
the Switch and also to dissipate heat.
system also provide heat vents to serve the same purpose.
Do not block these openings, and leave adequate space at
the rear and sides of the Switch for proper ventilation. Be
reminded that without proper heat dissipation and air
Identifying External Components
User's Guide
The sides of the
11