Configure Network Search; Configure Dhcp Server - TP-Link M7310 User Manual

4g lte mobile wi-fi
Hide thumbs Also See for M7310:
Table of Contents

Advertisement

Chapter 7
3. You can click
View Profile details
Create
to build a new one.
7. 4. 2.

Configure Network Search

The Mobile Wi-Fi provides two types of network connection: Auto and Manual.
Auto: The Mobile Wi-Fi will automatically establish Internet connection
when it is started.
Manual: When you have selected Manual, click
Fi will scan for mobile networks. You can choose a network with better
performance to connect to. The mobile carrier providing the network
must be or have cooperation with your SIM card provider.
1. Visit
http://tplinkmifi.net
you set for the Mobile Wi-Fi.
2. Go to
Advanced
3. Select
Auto
or
Manual
4. Click Save.
7. 5.

Configure DHCP Server

The Mobile Wi-Fi acts as a DHCP (Dynamic Host Configuration Protocol) server,
dynamically assigning TCP/IP parameters to devices from the IP Address pool.
You can change the settings of the DHCP server if necessary.
1. On your computer or tablet, visit http://tplinkmifi.net, and log in with the
password you set for the Mobile Wi-Fi.
2. Go to
Advanced
3. Enter a new IP address in the
default. And enter the starting and ending IP addresses in the
Address
fields respectively.
Note:
1. The Start and End IP Addresses should be on the same network segment as the IP address you have
entered.
to check the current profile. If any parameter is wrong, you can click
from the PC login entry, and log in with the password
>
Dial-up
>
Network
for
Network Search
>
DHCP
Server.
IP Address
Search
Settings.
as needed.
field and leave the
Customize Your Network
and the Mobile Wi-
Subnet Mask
as
Start
and
End IP
50

Advertisement

Table of Contents
loading

Table of Contents