Using The Touch Screen's Zoom Controls; Digital Tele-Converter - Canon VIXIA GX10 Instruction Manual

Using the Touch Screen's Zoom Controls

1 Open the onscreen zoom controls.
[FUNC] > [R Zoom]
• The zoom controls appear at the bottom the screen.
2 Touch the zoom controls to operate the zoom.
• Touch anywhere within the V area to zoom out or anywhere within the U
area to zoom in. Touch closer to the center for a slow zoom; touch closer
to the V/U icons for faster zooms.
3 Touch [X].

Digital Tele-Converter

Using the digital tele-converter, you can digitally increase the focal length of the camcorder by a factor of approx.
2 and record the enlarged image.
Operating modes:
1 Enable the use of the digital tele-converter function.
> [v ! Camera Setup] > [Digital Zoom] > [
2 Open the onscreen zoom controls.
[FUNC] > [R Zoom]
3 Touch [ ] (digital tele-converter) and then touch [X].
• The center of the screen will be enlarged approximately 2 times and the
of the screen.
• Touch [ ] again (before closing the screen) to turn off the digital tele-converter.
NOTES NOTES
• You can attach the optional TL-U58 Tele-converter and use it in conjunction with this function to increase the
effect.
• The digital tele-converter cannot be activated while recording or when [v Camera Setup] > [Conversion
Lens] is set to [¿ WA-U58].
• The image is digitally processed so the image will deteriorate throughout the zoom range.
Digital Tele-conv.] > [X]
icon will appear at the lower left
Zooming
55