Attaching The Enclosure - D-Link DCS-6111 Quick Install Manual

Attaching the Enclosure

Attaching the Enclosure
Once the lens is properly adjusted, rearrange the light shield so that
it will not obstruct the lens during surveillance.
Place the dome enclosure over the IP camera so that the LED sticker
on the dome enclosure is properly aligned with the camera's LED.
Insert the supplied screws into the two holes located at the base of
the dome enclosure, tighten until secure.
Place the ring enclosure over the dome enclosure. Once placed,
gently turn the ring enclosure clockwise until it locks and is securely
attached to the dome enclosure.
Note: When attaching the ring enclosure, be sure to first align the line on the
ring enclosure with the triangle on the dome enclosure. When attachment is
successfully made, the line on the ring enclosure will be aligned with the line
on the dome enclosure.
1 D-Link DCS-6111 Quick Install Guide