Hardware Overview - D-Link DNS-120 Manual

Hardware Overview

Front Panel
Power LED: Solid green
indicates a good power
source connection.
Rear Panel
Disconnect button:
button to safely disconnect USB
drives from the DNS-120.
USB Ports:
your USB drives to
the DNS-120.
Ethernet LED:
indicates an Ethernet connection.
Blinking green indicates activity on
the Ethernet network.
Press this
Ethernet Port:
Connects
your router or switch using
the included Ethernet cable.
5
USB LED: The USB LED will blink green when
a USB drive is being connected. When the
USB drive is fully connected the USB LED
will appear solid green. The USB LED blinks
red when the drive is being disconnected.
Solid green
Reset button:
will restore the DNS-120
factory default settings.
Connects to
This button
Receptor for the
provided Power
Adapter