Page 1
Electro-Voice Model REV-PH Handheld Wireless Microphone Transmitter The Electro-Voice (Ev) REV-PH is a Professional Grade Wireless Handheld Transmitter operating in the UHF frequency range. The REV-PH combines frequency agility and ease of use like no other. The transmitter operates within a 24 MHz wide segment in 25 KHz steps.
Page 2
REV-PH Controls and Connections: 1. Main Display – LCD. 2. Red low battery LED indicator 3. Power On/Off Switch 4. SET Control Button 5. Channel / Frequency Up Switch 6. Channel / Frequency Down Switch 7. Microphone Element 8. 9V Battery Compartment 9.
Page 3
Quick set-up: 1. With the Power Switch on the transmitter OFF, install fresh batteries into the transmitter. 2. To prevent feedback or unintentional noise, mute the audio mixer/amplifier or other device during set-up adjustments. Place the transmitter Power Switch to the ON position. 3.
Page 4
10. The next screen displays the operating frequency of the group/channel. If there is no frequency currently stored in the selected users group/channel, a dashed line will be shown. Press SET. The dashed line or frequency will start flashing. Press the up arrow one step at a time to find the desired frequency or hold down the up arrow to scroll through the frequencies quickly.
Page 5
Approval Information: (English) The Electro-Voice REV-PH Transmitter is Type Accepted under United States Federal Communications Commission CFR 47, Part 74 and Certified to Industry Canada RSS- 123. The device also complies with CRF 47, Part 15 of the FCC Rules and Industry Canada ICES-003 rules.
Page 6
(French) Le Electro-Voice REV-PH émetteur est Type accepté aux termes des États-Unis de la Federal Communications Commission CFR 47, partie 74 et certifié à Industrie Canada RSS-123. Le dispositif est également conforme CRF 47, partie 15 des règles de la FCC et Industrie Canada NMB-003 des règles.
Page 7
Conformité aux normes FCC Cet équipement a été testé et trouvé conforme aux limites pour un dispositif numérique de classe B, conformément à Partie 15 des règlements la FCC et NMB-003 canadien. Ces limites sont conçues pour fournir une protection raisonnable contre les interférences nuisibles dans une installation résidentielle.