Table of Contents
Related Manuals for Pyle PLCDBT75MRB
Summary of Contents for Pyle PLCDBT75MRB
- Page 1 MOBILE AUDIO SYSTEM PLCDBT75MRB USER MANUAL • PLL Synthesizer Stereo Radio • Bluetooth function • CD/MP3/WMA Player • Preset Equalization • Automatic Memory Storing • Electronic Shockproof (ESP) Function • Fixed Panel • USB/SD Interface...
-
Page 2: Table Of Contents
CONTENTS Installation ..........3 DISPLAY INFORMATION ....9 Take out screw before installation ..3 USB play operation ......9 DIN Front-Mount ......... 3 SD operation ........9 Disc notes.......... 10 Installing the unit ....... 3 Bluetooth Operation ......11 Removing the unit ...... -
Page 3: Installation
INSTALLATION Notes: Be sure you test all connections first, and Choose the mounting location where then follow these steps to install the unit. the unit will not interfere with the Make sure the ignition is turned off, and normal driving function of the driver. -
Page 4: Removing The Unit
INSTALLATION Screw (5x25mm) and Plain Washer) to attach the other end of metal strap to a solid metal part of the vehicle under the dashboard. This strap also helps ensure proper electrical grounding of the unit. Note to install the short threading terminal of the mounting bolt to the back of the unit and the other long threading terminal to the dashboard. -
Page 5: Wiring Connection
WIRING CONNECTION... -
Page 6: Operation
OPERATION LOCATION OF KEYS 1. “BAND” / button. “MODE”/ 12. USB port button. “ ” button 13. AUX jack “Vol /SEL” button 14. SD slot 15. “6 DIR+” button. 5. “AMS” button 16. “5 DIR-” button. 6. “ ” Seek down button 7. -
Page 7: Switching On/Off The Unit
OPERATION TURN ON/OFF THE UNIT Rotating the audio knob (4) to change the Press button (3) to turn on the unit. minute. Then press DISP button to confirm. When the unit is on. Press and hold it for 2 seconds to turn off the unit. LIQUID CRYSTAL DISPLAY SOUND ADJUSTMENT Exhibit current frequency and activated... -
Page 8: Automatic Memory Storing& Program Scanning
OPERATION shortly to activate automatic seek begins. function. It will search up/down a station If a CD is already inserted in the driver: automatically. Press for 2 seconds until “MANUAL” appears on the display, the Keep pressing MODE button (2) manual tuning mode is selected. -
Page 9: Display Information
OPERATION DISP button (7) is assigned as selection KEY Assigned IN Searching mode (Table 1) button in MP3/WMA operation. AS/PS Mode Select When pressed, it is activated as selecting ENTER each mode as below: A, B, C, 1 Search file number => Search File D, E, F, 2 Name=>Search from folder. -
Page 10: Sd Operation
OPERATION Different models have their disc that has important files in it. Because standards. So our product cannot any wrong operation may cause files loss. support every MP3 player. company assumes When connecting an MP3 player and responsibility for this. there has normal battery in the player (non rechargeable battery), you should DISC NOTES... -
Page 11: Bluetooth Operation
OPERATION this unit. (see *1) instruction manual of your mobile *1: To have more reliable play back, please see following recommendations: phone on how to operate Bluetooth.) a: Use CD-RWs with speed 1x to 4x 2) “CAR BIT” should appear in the list and write with speed 1x to 2x. -
Page 12: Remote Control Handset
REMOTE CONTROL HANDSET (OPTIONAL) FUNCTION KEY & CONTROL 1. POWER Power ON/OFF Button 2. MODE Mode Button(S,T,U,7,For MP3/WMA Operation) 3. BND Band Select Button VOL+ Volume Up Button (Character Select (A, B~8, 9, 0) For MP3/WMA Operation) 5. TUNE/SKIP Tune/SKIP Down Button(W,X,Y,8 For MP3/WMA) 6. -
Page 13: Specification
SPECIFICATION GENERAL Power Supply Requirements : DC 12 Volts, Negative Ground Chassis Dimensions : 178 (W) x 160 (D) x 50 (H) Tone Controls Bass (at 100 Hz) : ±10 dB Treble (at 10 kHz) : ±10 dB Maximum Output Power : 4x40 watts Current Drain : 10 Ampere (max.) (For Normal Power Version) -
Page 14: Trouble Shooting
TROUBLE SHOOTING Before going through the checklist, check wiring connection. If any of the problems persist after checklist has been made, consult your nearest service dealer. Symptom Cause Solution The car ignition switch is power supply No power. not on. connected to the car accessory circuits, but the engine is not moving, switch the ignition key...