Speaker
Follow these steps to remove the speaker:
1.
Prepare the computer for disassembly (see
2.
Remove the access panel (see
3.
Position the computer with the front panel toward you.
4.
Disconnect the speaker cable (1) from the system board.
5.
Release the speaker cable from the retention clip (2) built into the computer chassis.
6.
Remove the Phillips PM2.0×5.7 screw (3) that secures the speaker to the computer chassis.
7.
Remove the speaker (4).
Reverse this procedure to install the speaker.
Preparation for disassembly on page
Access panel on page
24).
23).
Speaker
31