Epson EB-710Ui User Manual page 82

Preparing Before Using Interactive Features
• Pens turns off automatically after 15 seconds when they are placed
a
on. Hold the pen to turn it back on.
• For best performance, hold the pen perpendicular to the board, as
shown below. Do not cover the black band near the tip of the pen.
You can do the following using the pen:
• Write or draw on the projection surface in whiteboard mode and
annotation mode.
• To select a projected item, such as an icon, tap the projection surface with
the pen tip.
• To draw on the projected screen, tap the projection surface with the pen
and drag it as necessary.
• To move the projected pointer, hover over the surface without touching
it.
• To switch the pen operation from a drawing tool to an eraser or other
functions selected in the projector's Extended menu, press the button on
the side.
Extended > Easy Interactive Function > General > Advanced > Pen
s
Button Function
• Use the pen as a mouse in computer interactive mode.
• To left-click, tap the board with the pen tip.
• To double-click, tap twice with the pen tip.
• To right-click, press the button on the side.
• To click and drag, tap and drag with the pen.
• To move the cursor, hover over the board without touching it.
• If you do not want to use the hovering feature, you can turn it off
a
using the Hovering setting in the projector's Extended menu.
s Extended > Easy Interactive Function > Hovering
• To make a long press of the pen act as a right-click, select the
following settings in the projector's Extended menu.
• Set the Pen Operation Mode setting to Ubuntu Mode.
s Extended > Easy Interactive Function > Pen Operation
Mode
• Set the Enable Right Click setting to On.
s Extended > Easy Interactive Function > Enable Right Click
g g Related Links
• "Pen Calibration" p.83
82