Receiving Faxes Automatically; Receiving Faxes Manually - Epson L1455 User Manual

Note: If you run out of paper during fax printing, load more paper and press the button indicated on your
product's LCD screen to continue.
Parent topic:

Receiving Faxes Automatically

To receive faxes automatically, make sure Receive Mode is set to Auto (the default setting for the
product).
To change the Receive Mode setting if necessary, select Setup > System Administration > Fax
Settings > Receive Settings > Receive Mode.
If an answering machine is connected, make sure the product's setting is set higher than the number of
rings your answering machine is set to answer a call. For example, if the answering machine is set to
pick up on the fourth ring, set the product to pick up on the fifth ring or later.
Parent topic:
Related references
Receive Settings - Fax
Related tasks

Receiving Faxes Manually

Receiving Faxes Manually
You can set up your product to receive faxes manually by setting the Receive Mode to Manual. This lets
you check for a fax tone on the connected telephone before receiving a fax.
1. When the connected telephone rings, answer the call.
2. If you hear a fax tone, select Start Fax on the LCD screen.
3. Select Receive.
4. Press the one of the
5. Hang up the telephone.
Parent topic:
Related references
Receive Settings - Fax
Related tasks
Receiving Faxes Automatically
Receiving Faxes
Receiving Faxes
buttons to start receiving the fax.
Receiving Faxes
193