Invacare Action 2 NG Service Manual page 45

Inspect/Adjust Weekly
Wheelchair rolls straight (no excessive drag or pull to one side).

Quick-release axles lock properly (see page 27).

 Inspect for broken spokes. Adjustment/replacement.
 Wheel/fork assembly has proper tension when caster is spun. Caster should come to a gradual stop.
 Inspect tires/castors for flat spots and wear.
 Check pneumatic tires for proper inflation (recommended tire pressure is listed on the side wall of the tire).
 Ensure castors are free of debris.
Inspect/Adjust Monthly
 Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that
attaches strap to frame is secure and undamaged. Replace if necessary.
 Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
Wheel bearings are clean and free of moisture.

 Wheel brakes do not interfere with tires when rolling.
 Wheel brake pivot point are free of wear and looseness.
 Ensure all castor/wheel/fork/head tube fasteners are secure (see pages 6 & 33).
 Ensure all hardware is tight (see page 6).
 Ensure hand grips are secure to backrest canes.
 Ensure castors are free of debris.
Inspect/Adjust every twelve months (1)
Wheelchair rolls straight (no excessive drag or pull to one side).

 Arms are secure but easy to release and locking systems engage properly.
 Adjustable height arms operate and lock securely.
 Armrest armpad sits flush against arm tube.
 All fasteners on clothing guards are secure.
 Seat and/or back upholstery have no rips.
 Inspect the backrest attaching hardware and mechanisms are securely tightened.
 No excessive side movement or binding when rear wheels are lifted and spun.
 Inspect handrims for signs of rough edges or peeling finish.
 Inspect side frame and cross brace for signs of cracks, flaked paint or deformed metal work.
Inspect tires/castors for flat spots and wear.

Check pneumatic tires for proper inflation (recommended tire pressure is listed on

the side wall of the tire).
SECTION 10— PERIODIC MAINTENANCE GUIDELINES
4 3