Adjust Volume; Radio Operation - Curtis KCR2606 Instruction Manual

WAKE UP TO RADIO:
a. Press the POWER BUTTON to switch power on.
b. Press the FUNCTION BUTTON to the RADIO function.
c. Tune the radio to a broadcasting station and adjust the volume as desired.
d. Press POWER BUTTON to switch power off.
e. Press the AL. SET BUTTON until " " sign show on the LCD Display.
f. The radio will sound at the set alarm time.
Note: To deactivate the alarm (Radio sound) manually, press the POWER BUTTON.
HOW TO TURN OFF THE ALARM
To cancel alarm mode:
In "POWER OFF" mode, press AL. SET button to turn off the alarm function.
(Alarm sign " " or " " will disappear on the LCD Display).

ADJUST VOLUME

Press VOL.MAX button to increase the volume.
Press VOL. MIN button to decrease the volume.

RADIO OPERATION

1. Press the POWER ON/OFF BUTTON to switch Power on.
2. Press the FUNCTION BUTTON to the RADIO Function.
(NOTE: Radio and CD Function are alternative select each time when the Function
Button is pressed.)
3. Press the REP/BAND BUTTON to desired band (AM/FM). AM and FM are alternately
selected each time when the REP/BAND button is pressed.
4. How to use the buttons for radio
a) Manual Tuning
Press the SKIP+/TUN+ BUTTON or SKIP-/TUN- BUTTON to search for desired
frequency. Higher frequency can be selected by pressing the "SKIP+/TUN+" button
while Lower frequency can be selected by pressing the "SKIP–/TUN–" button
b) Automatic Tuning
i) Press and hold the SKIP+/TUN+ BUTTON or SKIP–/TUN– BUTTON until the
display frequency starts run.
ii) When a station of sufficient strength has been found Tuning will stop or you can
stop the automatic tuning by pressing SKIP+/TUN+ or SKIP–/TUN– BUTTON.
5. Press the ST/MONO BUTTON to select Stereo and Mono as desired in case FM band is
being selected. (If stereo signal is too weak, press ST/MONO BUTTON to mono mode,
the reception will be improved.)
6. To switch off the radio, Press the Power ON/OFF Button.
8