LG Minibeam UST Owner's Manual page 11

Hide thumbs Also See for Minibeam UST:
Table of Contents

Advertisement

Others
WARNING
Some users may experience
a seizure or other abnormal
symptoms when they are
exposed to a flashing light or
particular patterns from a video
game.
When you go out, place the
projector out of reach of
animals, and remove the power
plug from the wall outlet.
- Using a damaged power cord
may result in short circuit
or fire.
Do not use the projector near
high-precision electronic devices
or those that transmit weak
radio signal.
- This may affect the operation
of the product, causing an
accident.
Only a qualified technician
can disassemble or modify
the projector. For diagnosis,
adjustment, or repair, contact
your seller or our service center.
- This may result in fire or
electric shock.
Proper ventilation required, do
not block airflow around unit.
Doing so can cause injury and
internal overheating.
To prevent damage to lamp,
unit must remain plugged in for
approximately 3 minutes after
power down to allow for proper
cool down (not applicable on
LED models).
Do not touch the lens; doing so
can result in burns or damage
to lens. Lens and unit may be
HOT during and immediately
after use. Use caution when
handling unit, allowing for proper
cool down.
Only use a grounded electrical
outlet. (Except for devices which
are not grounded.)
Do not insert anything into or
cover up the exhaust vents.
- This may result in fire or
electric shock.
Follow all maintenance
guidelines for optimal use;
service only at an authorized
service center.
Lamp contains mercury and
as such must be disposed of
according to local, state and
federal laws (not applicable on
LED models).
Keep the batteries and remote
out of reach of children.
- This will prevent personal
injury or damage to the
product.
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ph450ug

Table of Contents