Advertisement
To Play the Radio
1. Slide the AUTO/OFF/ON Switch to the "ON" position.
2. Slide the ALARM/RADIO Selector to the "RADIO" position.
3. Slide the AM/FM Band Switch to select either the AM or FM bandwidth.
4. Set the radio volume by rotating the Volume Dial clockwise to the desired volume
level.
5. Tune the radio to a broadcasting station using the Tuning Dial.
6. To turn off the radio, slide the AUTO/OFF/ON Switch to the "OFF" or "AUTO" (if the
alarm is set) position.
Reference the "Setting the Alarm" procedures if resetting the alarm function.
Note:
For better reception, FM wire antenna shall be fully untied and adjusted well.
This unit has a built-in antenna for AM and FM, Locate the unit where you can obtain the
best reception.
Setting the Time
To set the hour(s):
Press and hold the "TIME.SET" Button, then press the "HOUR" Set
Button until the correct hour(s) is reached.
To set the minute(s):
Press and hold the "TIME.SET" Button, then press the "MIN" Set Button
until the correct minute(s) is reached.
Setting the Alarm
To set the alarm time:
1. Press and hold the "AL.SET" Button, then press the "HOUR" Set Button until the
correct alarm hour(s) is reached.
2. Press and hold the "AL.SET" Button, then press the "MIN" Set Button until the
correct alarm minute(s) is reached.
To wake by the radio:
Slide the AUTO/OFF/ON Switch to the "ON" position to turn on the radio.
-
Slide the ALARM / RADIO Selector to the "RADIO" position.
-
-
Turn the radio on and select as previously instructed for setting the radio.
To wake by the buzzer:
-
Slide the ALARM/RADIO Selector to the "ALARM" position.
3. Slide the AUTO/OFF/ON Switch to the "AUTO" position. (A glowing dot appear in
the top of the left hand corner)
4. To turn off the alarm, press the AL.OFF Button or slide the AUTO/ OFF/ ON
Switch to the "OFF" position.
NOTE: Press the "AL. SET' button also can turn off the alarm function.
7
Advertisement
