Curtis DCD5159 Quick Start Manual

Quick Start Guide

DCD5159
1 2 3 4
6 7 8
9 10
18 17 16 15
1. POWER button
5
2. SHUTTER button
3. Flash
4. Viewfinder
5. Lens
6. Function light
7. Charging light
19
8. REC mode
20
9. Mode switch
10. PLAY mode
11. UP button
12. RIGHT button
13. OK button
14. DOWN button
11
15. Battery cover
12
16. LEFT button
13
17. MENU/DISP button
14
18. LCD screen
19. TV jack
20. USB port
Quick Start
• Unpack the carton and take out your camera.
• Slide to open the battery compartment cover and load 2 AAA batteries (recommend
using the recharged batteries) following the marked.
• Close the battery compartment cover.
Take Pictures
• Press the POWER button to turn on your camera.
• Turn the mode switch to REC position.
• Target your subject in the LCD or in the viewfinder. If the LCD is off, please press
the DOWN button to turn on.
• Press the RIGHT button to select the desired snap mode.
• Press the LEFT button to select the desired flash mode.
• Adjust the distance, and center your subject in the LCD, then press the SHUTTER
button to capture a picture.
View Pictures
• Press the POWER button to turn on your camera.
• Turn the mode switch to PLAY position.
• Press the LEFT/RIGHT buttons to iterate through your pictures.
• Press the UP button to enter thumbnail mode (9 pictures will be displayed on
the LCD).
• In thumbnail mode, you can press the LEFT/RIGHT buttons to select the desired
picture, and press UP button to display it singly on the LCD.
Download Pictures to PC
• Turn the mode switch to PLAY position.
• Plug in the USB cable to the PC USB port and your camera USB port.
• Your camera will enter the "Mass Storage" mode. And the removable disk will
appear in your PC.
• Now you can download the pictures in your camera to your PC (if your PC's OS
is windows 98, you must install the camera driver in your PC firstly).