Minute Minder; Setting The Minute Minder For A Cooking Zone - Miele KM 3034 Operating And Installation Instructions

A duration of between 1 minute ()
and 6 hours (.) can be set.
Use the - sensor to reduce the time
from . to , and the + sensor to
increase the time from  to .. The
display stops at . and at . To
continue beyond this setting, briefly
remove your finger from the sensor and
then touch it again.
Durations exceeding 99 minutes are set
in half-hour steps. The half hour is
indicated by a dot after the number.

Minute minder

Setting
 Touch the  sensor.
 and the minute minder indicator light
will flash in the timer display.
 Select the time you want with the - or
+ sensor.
Changing the minute minder
 Touch the  sensor.
 Select the time you want with the - or
+ sensor.
Deleting the minute minder
 Touch the  sensor.
 Touch and hold the - and + sensors
at the same time until  appears in
the timer display.
Setting the minute minder for a
cooking zone
A minute minder can be allocated for
any switched on cooking zone. This
function can be used simultaneously for
all cooking zones.
 Switch on the required cooking zone.
 Keep touching the  sensor until the
indicator light for this cooking zone
starts flashing.
If several cooking zones are switched
on, the indicator lights for the cooking
zones being used light up anti-
clockwise, starting with the front right.
 Select the time you require.
 If you want to set another cooking
zone to switch off automatically,
follow the same steps as described
above.
If more than one switch-off time is
programmed, the shortest time
remaining will be displayed, and the
corresponding indicator light will flash.
The other indicator lights will light up
constantly.
 If you want to show the time
remaining for another zone which is
counting down in the background,
touch the  sensor repeatedly until
the indicator light for the zone you
require flashes.
Minute minder
29