Summary of Contents for Interlogix UVP 1.3 MPX HD 18X
Page 1
Start Guide Introduction This pocket guide provides basic information on setting up and using the UVP 1.3 MPX HD 18X PTZ Camera. Detailed information on the cameras can be found in the user manual. Before you begin Unpack everything. Check the items for damage, and verify that all items are included.
Adjust the height of the two housing tabs by turning the screw on which they are attached. The distance (h) of the tabs from the housing ring must be greater than the thickness of the ceiling. EN 2 UVP 1.3 MPX HD 18X PTZ Camera...
Page 3
Flush mount camera only: Install the trim ring. Align the trim ring to the housing, and insert the fix-pins to the holes. Then rotate the ring clockwise. 8. Connect the cables (see Figure 1). UVP 1.3 MPX HD 18X PTZ Camera 3 EN...
4. Right-click Camera 01 to open the pop-up box and select the desired stream: Main, Sub or Open sound. EN 4 UVP 1.3 MPX HD 18X PTZ Camera...
Page 5
The configuration pane displays the configuration tree with 10 configuration parameter folders. The configuration pane is always visible. Each folder has a list of subfolders that display the different configuration screens. UVP 1.3 MPX HD 18X PTZ Camera 5 EN...
Page 6
Defines how the camera handles alarms such as input type, notification of alarms, and response schedules and duration. Motion Defines how the camera moves such as presets, shadow tours, and privacy masks. EN 6 UVP 1.3 MPX HD 18X PTZ Camera...