Siemens WT48Y890GB Installation And Operating Manual

Siemens WT48Y890GB Installation And Operating Manual

Advertisement

Quick Links

Tumble dryer
WT48Y890GB
siemens-home.com/welcome
en
ens-home.com/welcome
Register
your
product
online

Advertisement

Table of Contents
loading

Summary of Contents for Siemens WT48Y890GB

  • Page 1 Tumble dryer WT48Y890GB siemens-home.com/welcome Register your product online ens-home.com/welcome...
  • Page 2 Caution! To meet the high quality demands required by Siemens, every tumble dryer This signal word indicates a possibly that leaves our factory is carefully dangerous situation. Not heeding the checked to ensure that it functions caution can cause property and/or correctly and is in perfect condition.
  • Page 3: Table Of Contents

    Contents e n I n s t a l l a t i o n a n d o p e r a t i n g i n s t r u c t i o n s Intended use....4 Operating the appliance .
  • Page 4: Intended Use

    Intended use Intended use Safety instructions The following safety information This appliance is intended for private ■ I n t e n d e d u s e S a f e t y i n s t r u c t i o n s and warnings are provided to domestic use only.
  • Page 5 Safety instructions Do not allow children to Warning ■ clean or maintain this Risk of suffocation! appliance unsupervised. If allowed to play with the Keep children under 3 years packaging/plastic film or ■ and pets away from this packing components, children appliance.
  • Page 6: Installation

    Safety instructions Installation Warning Risk of electric shock/fire/ Warning material damage/damage to Risk of electric shock/fire/ the appliance! material damage/damage to If the appliance's mains cable is the appliance! altered or damaged, this may If the appliance is not installed result in electric shock, short properly, this may lead to a circuiting or fire due to...
  • Page 7: Operation

    Safety instructions Incorrectly placing (stacking) Warning ■ this appliance on top of a Risk of injury! washing machine may result The appliance is very heavy. ■ in injury, material damage Lifting it may result in injury. and/or damage to the Do not lift the appliance on appliance.
  • Page 8 Safety instructions Do not use the appliance if During the last part of the ■ ■ industrial chemicals have drying cycle, the laundry in been used to clean the the drum is not heated laundry. (cooling cycle). This is to ensure that it remains at a Warning temperature at which it will...
  • Page 9 Safety instructions If you operate the appliance Warning ■ without a fluff filter, or if the Risk of injury! fluff filter is defective, this If you support your weight/sit ■ may result in damage to the on the appliance door when appliance.
  • Page 10: Cleaning/Maintenance

    Safety instructions If the appliance overheats, it Repairs and any other work ■ ■ may not be able to operate on the appliance must only properly, or this may result in be conducted by our material damage or damage customer service or by an to the appliance.
  • Page 11 Safety instructions Warning Risk of injury/material damage/damage to the appliance! The use of spare parts and accessories supplied by other brands is dangerous and may result in injury, material damage or damage to the appliance. For safety reasons, use genuine spare parts and accessories only.
  • Page 12: Environmental Protection

    Environmental protection Energy-saving tips Environmental protection Spin the laundry before drying. ■ The drier the laundry, the shorter the drying time will be, thus Packaging/old appliance consuming less energy. E n v i r o n m e n t a l p r o t e c t i o n Load the dryer with the maximum Dispose of packaging in an ■...
  • Page 13: Installation And Connection

    Installation and connection You could cut your hands on the ■ Installation and sharp edges of the dryer. Do not hold the dryer by the sharp edges. connection Protruding parts on the dryer may ■ break off when it is lifted or pushed. Scope of delivery Do not move the dryer by holding on I n s t a l l a t i o n a n d c o n n e c t i o n...
  • Page 14: Changing The Condensation Drain

    Installation and connection Changing the condensation Disconnect the hose from the connecting piece and put it in the drain "parked" position. Notes The condensation from the dryer can ■ either be discharged into the condensation container or drained off via a connection to the waste- water system.
  • Page 15 Installation and connection Fasten the other end of the drain hose with the remaining accessories, depending on the connection situation (A, B or C). Caution! Accumulated water can be drawn back into the dryer and may cause material damage. Check that the water drains away from the wash basin quickly. The drain must not be sealed or blocked.
  • Page 16: Changing The Side On Which The Door Is Hinged

    Installation and connection Pull out the condensate container Slide in the condensate container fully. until it clicks into place. Turn the condensation container The condensation is now discharged via 180° onto its underside and remove the drain hose into the waste-water the stopper that is fitted.Turn the system or into a wash basin condensate container back over and...
  • Page 17 Installation and connection Remove the screws from the dryer Remove the screws from the door and then remove the dryer door. handle on the dryer door and remove the door handle. Use a T20 (Torx) screwdriver Note: only. Do not use any other tools to change the side on which the door is hinged.
  • Page 18 Installation and connection Remove the rings from the dryer Put the door hinge and door handle door. in place as shown in the picture, and screw them back onto the dryer door. Swap the rings around. Press the rings onto the dryer door. Remove the cover from the door lock on the dryer and place it to one side.
  • Page 19 Installation and connection Insert the door lock (1.) on the other side of the dryer and screw the cover (2.) back on. Now also screw the dryer door back You can now reconnect the dryer, close the door and start a programme.
  • Page 20: Optional Accessories

    Installation and connection Optional accessories Transport and frost protection Order optional accessories from the Empty the condensate container. after-sales service: Select any programme using the programme selector. Washer-dryer stack connection set: Press the Start button. ■ To save space, the dryer can be Wait for 5 minutes.
  • Page 21: The Main Points In Brief

    The main points in brief The main points in brief T h e m a i n p o i n t s i n b r i e f Load the laundry and close Switch the dryer on. Select a programme, and the door.
  • Page 22: Getting To Know Your Appliance

    Getting to know your appliance Getting to know your appliance Dryer G e t t i n g t o k n o w y o u r a p p l i a n c e ( Condensate container 0 Control and display panel 8 Drum interior light (depending on the model) @ Dryer door...
  • Page 23: Control Panel

    Getting to know your appliance Control panel ( Programmes ~ Page 26. 0 Programme selector and On/Off button. 8 Display panel with buttons ~ Page 23. @ Start button for starting, interrupting or cancelling the programme. H Buttons ~ Page 27.
  • Page 24: Display Panel

    Getting to know your appliance Display panel Button Button Description Display Select the dryness level. Ø Iron Dry e Cupboard Dry Cupboard Dry Plus Select Anti-Crease. Anti-Crease function in minutes Select Ready in. 1:40 Expected programme duration in hours and minutes or timed programme selected Programme delay in hours when "Ready in"...
  • Page 25: Laundry

    Laundry – Clean the moisture sensor Laundry regularly ~ Page 35. P reparing the laundry Sorting washing according to: L a u n d r y Warning c Suitable for tumble drying Risk of explosion/fire! a Dry at normal temperature Remove any cigarette lighters and ` Dry at low temperature matches from pockets.
  • Page 26: Programmes And Buttons

    Programmes and buttons Programmes and buttons Programmes P r o g r a m m e s a n d b u t t o n s Programme and fabrics Maximum load and programme settings/info Name of the programme The maximum load is based on the dry weight of the fabrics Which fabrics is the programme suitable for? Possible programme settings...
  • Page 27: Buttons

    Programmes and buttons Rapid 40’ 2 kg Synthetics and light cottons. Dark Wash 6 kg Dark fabrics made of cotton and dark, easy-care fabrics. Turn laundry inside-out before drying. Blankets 2.5 kg Fabrics, pillows, quilts or bedspreads filled with synthetic fibres. Dry large items individually.
  • Page 28 Programmes and buttons × Options Select the button and the menu will be displayed in the display panel. ø Spin class For the spin class, set the spin speed at which the laundry has been spun in the washing machine. This permits the expected drying time to be indicated more pre- cisely.
  • Page 29: Operating The Appliance

    Operating the appliance The basket for woollens Operating the appliance The basket for woollens is Note: supplied with your dryer or it can be purchased as an accessory from the Loading laundry and after-sales service. O p e r a t i n g t h e a p p l i a n c e switching on the dryer Caution! The dryer must be correctly...
  • Page 30: Drying With The Basket For Woollens

    Operating the appliance Drying with the basket for b) Pullover woollens Insert the feet of the basket for woollens into the holes on the fluff filter. c) Sports shoes Place sports shoes in the basket for woollens without the insert. Pull out the tongues of the shoes and remove the insoles or heel cushions.
  • Page 31: Setting A Programme

    Operating the appliance Place the insert or the sports shoes Setting a programme in the basket for woollens. If you have activated the Caution! Note: childproof lock, you must deactivate it Risk of material damage to before you can set a programme, see the fabrics.
  • Page 32: Programme Sequence

    Operating the appliance Programme sequence Press the # button to switch the dryer off. The programme status is indicated in the display field. Changing the programme or adding laundry You can remove or add laundry and change or alter the programme at any time during drying.
  • Page 33: Emptying The Condensate Container

    Operating the appliance Pull apart the two-part fluff filter. Emptying the condensate container Notes You can drain off the condensation ■ into the waste-water system using an optional condensation drain . For installation, see ~ Page 14. If you drain the condensation using ■...
  • Page 34: Noises

    Noises Pour out the condensation water. > Noises During drying, particularly in the N ote: N o i s e s initial phase, operation of the appliance results in noise from the compressor and pump. This is perfectly normal and does not impair proper functioning of the appliance.
  • Page 35: Cleaning

    Cleaning The condensation is pumped into Cleaning the moisture sensor the condensate container by a pump. This generates pumping noises. The dryer is equipped with a Note: stainless-steel moisture sensor. The moisture sensor measures how damp the laundry is. After long periods of usage the moisture sensor may become covered by a fine layer of limescale or residues of detergents and care products.
  • Page 36: Cleaning The Filter In The Condensate Container

    Cleaning Cleaning the filter in the condensate container The filter in the condensate Note: container cleans the condensation water that is used during the dryer's automatic cleaning cycle. Pull out the condensate container horizontally. Pour out the condensation water. Remove the filter. Clean the filter under warm, running water or in the dishwasher.
  • Page 37: Faults And What To Do About Them

    Faults and what to do about them Faults and what to do about them F a u l t s a n d w h a t t o d o a b o u t t h e m Faults Cause/remedy Empty the condensate container;...
  • Page 38 Faults and what to do about them Faults Cause/remedy Laundry is not dried cor- After the end of the programme, warm laundry feels damper than it actually ■ rectly or is still too damp. is. Spread the laundry out and allow the heat to disperse. Finely adjust the dryness level –...
  • Page 39: After-Sales Service

    After-sales service After-sales service After-sales service A f t e r - s a l e s s e r v i c e If you cannot rectify the fault yourself (faults, what to do?), please contact our after-sales service. We will always find an appropriate solution to avoid unnecessary visits by engineers.
  • Page 40: Consumption Values

    Consumption values Consumption values Consumption values table C o n s u m p t i o n v a l u e s Spin speed which is Programme used for spinning Duration** Energy consumption** the laundry Cottons 9 kg 4,5 kg 9 kg 4,5 kg...
  • Page 41: Technical Data

    Technical data Technical data Dimensions: T e c h n i c a l d a t a 85 x 60 x 60 cm Height x width x depth Weight: Approx. 57 kg Maximum load: 9 kg Condensate container: 4,6 l Connected voltage: 220 - 240 V Connected load:...
  • Page 44 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.com *9001065074* 9001065074 (9604)

Table of Contents