Panasonic TX-L42DT50Y Operating Instructions Manual page 6

Attach the cover
2
Attach the cover
C
Moving the TV
Hold the specified parts as shown to stand the TV up and move it with two people.
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Put the TV onto a work table with the screen panel down on the clean and soft cloth.
2 Remove the assembly screws
3 Remove the assembly screws
4 Remove the pedestal from the TV.
5 Remove the assembly screws
Adjusting the panel to your desired angle
Do not place any objects within the full rotation range.
Preventing the TV from falling over
Using the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to the
installation surface.
The place where the pedestal is to be fixed should be thick enough and made of hard material.
6
and fix securely with assembly screws
E
from the cover.
from the TV.
from the bracket.
(View from the top)
.
15°
15°
(TX-L42DT50Y, TX-L47DT50Y)
Screw (not supplied)
Diameter: 3 mm
Length: 15 - 20 mm
Screw hole