Rear Shock Absorber Adjustment - Yamaha BLASTER YFS200T Owner's Manual

b
1. Adjusting nut
1. Écrou de réglage
1. Tuerca de ajuste
a. Spring length
a. Longueur du ressort
a. Longitud del resorte
a
q
w
2. Locknut
2. Contre-ècrou
2. Contratuerca
a
EBU12881

Rear shock absorber adjustment

The spring preload can be adjusted to suit the
rider's weight and riding conditions.
Adjust the spring preload as follows.
1. Loosen the locknut.
2. To increase the spring preload, turn the
adjusting nut in direction a. To decrease
the spring preload, turn the adjusting nut in
direction b.
cC
Never attempt to turn the adjusting nut
beyond the maximum or minimum setting.
NOTE:
A special wrench can be obtained at a Yamaha
dealer to make this adjustment.
3. The length of the spring changes 1 mm per
turn of the adjusting nut.
Measurement A:
Installed length:
Standard: 230 mm
Minimum (hard): 222 mm
Maximum (soft): 234 mm
4-33