Page 1
Removing the MP3 Player from your computer Trouble Shootings Specifications Safety Introducing the MP3 Player The MP3 Player incorporates a portable WMA/MP3 Player, Voice Recorder and Mass Storage Device. MP3 Player Features: WMA/MP3 player. Synchronous lyric display with WMA/MP3 music.
Installing the MP3 Player Installation of drivers for computers using Windows Me/2000/XP is not necessary. Note for Windows Me/2000/XP users: Installation of the MP3 Player drivers is required only if you wish to upgrade the firmware of the player.
Listen to WMA/MP3 music files with the MP3 Player 1. Follow the instructions for the transfer of data to and from the MP3 Player to copy WMA/MP3 music files to the MP3 Player. 2. Install 1 AAA/LR03 battery into the battery compartment.
Note: Make sure the MP3 music and LRC file is located in same directory and the filename is same. If not, the MP3 player can not recognize the lyric file. MP3 Player Controls A. USB Port Cover B.
This operation is similar to the playback of music. 1. Select Voice in the LCD menu to enter Voice mode. 2. Select a recording to listen to by pressing the Skip buttons. 3. Press the Play button to playback the recording. file://C:\Documents and Settings\fay\桌面\MP514-STMP3505\English\gu... 页码,5/13 2007-5-11...
1. To activate the Hold function, slide the Hold switch. 2. Slide the Hold switch back to turn off the Hold function. Note: The MP3 Player will turn off automatically if the key is hold when turning on the power. Navigation Use [Menu] button to enter Menu.
3. Press the A-B/Menu button to activate. Play mode Setting The available Play modes are: Normal Repeat Track Repeat All Shuffle Shuffle Repeat 1. In the settings menu, select Play Mode. 2. Press the Skip buttons to select a play mode. file://C:\Documents and Settings\fay\桌面\MP514-STMP3505\English\gu... 页码,7/13 2007-5-11...
2. Press the Skip buttons to select "Source". Press the A-B/Menu button repeatedly to select a record source which you want to change its sampling frequency or recording format settings. 3. Press the Skip buttons to select "Encoder". Press the A-B/Menu button repeatedly to select a recording format. file://C:\Documents and Settings\fay\桌面\MP514-STMP3505\English\gu... 页码,8/13 2007-5-11...
Load default To reset all setting to factory default setting, 1. In the settings menu, select "Load default" 2. Press the A-B/Menu button. The default settings are loaded to the MP3 Player. Erasing files Warning: Erased files cannot be recovered.
PC. To update the firmware, run the Firmware Download utility. The MP3 Player installed to use the Software Utility. 1. Plug the MP3 Player into the USB port of your computer. The built-in LCD displays "READY", indicating that the MP3 Player is in USB mode.
1. Connect the MP3 Player to the computer. 2. Format the MP3 Player (removable disk) using the Windows format tool. Note: Do not select NTFS from the File System menu. Otherwise, the MP3 Player can not work and need to format it again.
In order to play these encrypted WMA files in your MP3 player, you will need to use the Wind Media player to copy them to your MP3 player. The traditional “Drag & Drop” method will work.
Page 13
Listening to loud sounds for prolonged periods may permanently damage your hearing. Before putting on the headphones, place them around your neck and turn the volume down. Then put the headphones on and slowly increase the volume until you find a comfortable listening level. file://C:\Documents and Settings\fay\桌面\MP514-STMP3505\English\gu... 页码,13/13 2007-5-11...