Powering On/Off Your Digital Camcorder - Vivitar DVR 548NHD User Manual

The ViviLink technology allows you to quickly and easily upload your camcorder's photos and videos
to the social networks of your choice with the accompanying software application.
1) First you will be asked to choose the default ViviLink social network for Videos. Highlight the
desired default social network and press the SET/OK button to confirm the selection.
2) Next you will be asked to choose the default ViviLink social network for Photos. Highlight the
desired default social network and press the SET/OK button to confirm the selection.
Congratulations - your digital camcorder is now ready to use!

Powering ON/OFF Your Digital Camcorder

Make sure the batteries have been inserted properly into your digital camcorder.

Make sure an SD card has been inserted into your digital camcorder.

(SD card up to 32GB - SD Card not included)
Powering the Digital Camcorder ON
Press the Power button
The camcorder will be in Video Capture mode to start.
Powering the camera OFF
While the camcorder is on, you can press the Power button
camcorder OFF. You will see a "Goodbye" splash screen and then the camcorder will power off
completely.
Note: Your digital camcorder also has an Auto Power Off feature that automatically turns off your
camera after a specific period of time that your camcorder is left idle. The Auto Power Off can be set
from the Auto Power Off settings menu.
to turn your camcorder ON.
again at any point to turn your
10