Video Playback Mode - Vivitar DVR 538NHD User Manual

Video Playback Mode

The Playback Mode allows you to review and edit photos and videos that you've already taken with
you camcorder.
When you first turn on the camcorder, the camcorder will be in Video Capture mode by default.

Press the Playback button to open the Playback Mode.

Alternatively, press the MODE button twice.
The latest captured image appears on the LCD screen.

If there are no images stored, a message (No File) appears.
Playing Videos on Your Camcorder
1) Select your video:
 Once in Playback mode, press the LEFT or RIGHT button to scroll through the images on your
camcorder's memory card until you find the video you would like to view.
 Each captured image (video and photo) is displayed on the LCD screen.
 Videos appear with an 'AVI' icon on the top left of the LCD screen.
2) Play your selected video:
 Press the Shutter button to START playing the video.
 Press the Shutter button again to PAUSE the video and to continue playing and pausing as
needed.
 To fully STOP the video and restore the icons to the LCD, press the UP button.
 While the Video is playing all the icons on the top section of the LCD disappear.
Thumbnail View
Easily navigate and select the image you wish to view by using the Thumbnail View.
The images on your camera will be displayed in a 3 X 3 matrix where you can use the direction buttons
to scroll and select images from the thumbnails.
1) Press the /
2) All the images on your camera appear in the Thumbnail View.
3) Press the UP / DOWN / LEFT / RIGHT buttons to scroll and select the image you wish to view.
4) Press the OK button to enlarge the selected image to full screen size.
5) Once the selected video is full size you can play and view the video.
Zoom Out/Thumbnail button.
25