Identifying Controls - Panasonic TX-L32B6E Operating Instructions Manual

Using the cable tie
Do not bundle the RF cable and mains lead
together (could cause distorted image).
Fix cables with the cable tie as necessary.
When using the optional accessory, follow the
option's assembly manual to fix cables.

Identifying Controls

Indicator / Control panel
When pressing 1, 2, 3 buttons, the control panel guide appears on the right side of the screen for 3 seconds to
highlight the pressed button.
1
2
3
4
Rear side of the TV
1 Input mode selection
Press repeatedly until you reach the desired
mode.
[Main Menu]
Press and hold for about 3 seconds to display
main menu.
OK (when in the menu system)
(supplied)
32-inch model
Attach the cable tie
Insert the cable
tie in a hole
To remove from the TV:
5 6 7
Bundle the cables
hole
hooks
To loosen:
snaps
Keep pushing
both side snaps
2 Channel Up / Down
Cursor Up / Down (when in the menu system)
3 Volume Up / Down
Cursor Left / Right (when in the menu system)
4 Mains power On / Off switch
Use to switch the mains power.
5 Remote control signal receiver
Do not place any objects between the TV remote
control signal receiver and remote control.
6 Ambient sensor
Senses brightness to adjust picture quality when
[Ambient Sensor] in the Picture Menu is set to
[On].
7 Power LED
Red: Standby
Green: On
The LED blinks when the TV receives a command
from the remote control.
Set the tip in
the hooks
Keep pushing
the knob
knob
9