Port Triggering - D-Link DSL-G225 User Manual

Section 4 - Configuration
This page allows you to manually configure the router's Port Triggering settings.
On this page you will see a list of current port forwarding configurations. Click Add to add
a port trigger
Use Interface:
Select the interface to use with the rule.
Select an Select an application you want to setup for port triggering or enter
application: a name in Custom application.
Schedule: Select a schedule or choose Always.
Trigger Port Start/ Enter the trigger port(s).
End:
Trigger Protocol: Select TCP or UDP.
Open Port Start/ Enter the port(s) to open.
End:
Click Apply when you are done.
D-Link DSL-G225 Wireless N300 ADSL2+/VDSL2 Modem Router User Manual

Port Triggering

PORT TRIGGERING
58