Password Setting; Login; Plug-In Support Specifications For Each - Samsung XNO-6080R User Manual

paSSworD SettinG

When you access the product for the first time, you must register the
login password.
When the "password change" window appears, enter the new
password.
For a new password with 8 to 9 digits, you must use at least 3 of
`
J
the following: uppercase/lowercase letters, numbers and special
characters. For a password with 10 to 15 digits, you must use at
least 2 types of those mentioned.
-
Special characters that are allowed. : ~`!@#$%^*()_-+=|{}[].?/
For higher security, you are not recommended to repeat the same characters or consecutive keyboard inputs for your
`
passwords.
If you lost your password, you can press the [RESET] button to initialize the product. So, don't lose your password by using a
`
memo pad or memorizing it.

LoGin

Whenever you access the camera, the login window appears.
Enter the User ID and password to access the camera.
1. Enter "admin" in the <user name> input box.
The administrator ID, "admin", is fixed and can not be
changed.
2. Enter the password in the <password> input field.
3. Click [oK].
If you have logged in successfully, you will the Live Viewer
screen.
When you access the camera web viewer, pay special attention to the
`
J
security by checking whether the image data is encrypted.
If you check the "Remember my credentials" option when your input is done, in future you will be logged in automatically
`
M
without being prompted to enter the login information.
You will experience the best video quality if the screen size is 100%. Reducing the ratio may cut the image on the borders.
`
pLuG-in Support SpecificationS for eacH BrowSer
The existing plug-in web viewer and a new plug-in free web view is embedded together.
This allows you to use the web viewer in newer browser environments that do not support plug-ins, such as
Chrome, EDGE, FireFox (Windows 64-bit only), and Safari. For browsers that allow the installation of plug-ins,
such as IE and Safari, installing the plug-in is recommended.
According to the browser environment, the following differences may be observed.
• chrome, firefox(windows 64bit only), eDGe browser : Although they don't support plug-ins, you can
use a web viewer as a plug-in free web viewer is embedded.
As the plug-in free webviewer has lower performance than the plug-in webviewer, it has a limit on the monitoring of high
`
J
quality profiles and playback of saved videos.
To monitor high quality profiles and play saved videos, use either a plug-in webviewer or SmartViewer.
-
Plugin-free webviewer creation conditions: The selected profile exceeds MJPEG Full HD 10fps H.264 (Chrome : full screen
resolution supported / Edge, Firefox, Safari : Full HD 30 fps or higher) H.265 FullHD 10fps 2Mbps or higher
- Plugin-free playback conditions: MJPEG/H.264 full screen resolution, H.265 HD or below
The plug-in free feature has been optimized for the Chrome browser.
`
Supports Adaptive Streaming
`
- This is the feature that automatically lowers the profile if there is a delay of more than 5 seconds. It was made to prevent
issues such as increased latency and no response from the browser when playing the video on a system with lower hardware
specifications than recommended.
The video profile is reduced in the following sequence: 1920X1080(20fps) -> 1280X720(20fps) -> 640X480(20fps).
In the following cases, the detection performance may be impaired or an malfunction may occur.
`
- Monotonous monitoring environment, night or low illumination environment
-
Severe camera wobbling and sudden changes in illumination
• ie, Safari browser : You can use a web viewer even if you don't install the existing plug-in web viewer.
To monitor/play saved video seamlessly, you are required to install a plug-in.
`
J
In the following cases, the detection performance may be impaired or an malfunction may occur.
`
- Monotonous monitoring environment, night or low illumination environment
-
Severe camera wobbling and sudden changes in illumination
English _21