Can The Stylus Tip Be Replaced; Calibrating The Stylus; Installing A Stylus Tether - Fujitsu Stylistic Q555 Operating Manual

Can the stylus tip be replaced?

Calibrating the stylus

If Windows 8.1 is installed on your Tablet PC, your Tablet PC is already calibrated at initial setup.
If a different operating system is installed on your Tablet PC, you must calibrate it with the
stylus before first use, so that it recognizes the stylus as accurately as possible.
You should also always repeat the calibration if the co-ordination between the
stylus and the cursor movement deteriorates.
Operating system
Windows 8.1 Desktop

Installing a stylus tether

Attach the stylus with a stylus tether to prevent accidentally dropping it or losing it.
You device has one eyelet on the left side and one eyelet on the right side for securing the stylus
tether (see "Ports and controls", Page
► Fasten the stylus tether to the stylus eyelet and to the eyelet on the Tablet PC.
Fujitsu
Menu
To calibrate, run the Hardware and Sound / Tablet PC Settings function in the
Control Panel. You need to calibrate both portrait and landscape formats.
9). The tether eyelet on the right side is shown below.
Working with the Tablet PC
31