Important Safety Instructions - Rowenta DW5080 Instructions For Use Manual

IMPORTANT SAFETY
When using an iron, basic precautions should always be followed, in-
cluding the following:
Read all instructions before using
1. Only use an iron for its intended use.
2. To avoid the risk of electric shock, do not immerse the iron in water
or other liquids.
3. Always turn the iron OFF before plugging or unplugging the iron
from the electrical outlet. Never pull on the cord to disconnect the iron
from the electrical outlet; instead, grasp the plug and pull on the plug
to disconnect the iron.
4. Do not let the cord touch hot surfaces. Let the iron cool comple-
tely before putting the iron away. Coil the cord loosely around the iron
when storing.
5. Always disconnect the iron from the electrical outlet before filling
the iron with water, emptying the water from the iron, and when the
iron is not in use.
6. Do not operate the iron with a damaged cord or in the event the iron
has been dropped or damaged. To avoid the risk of electric shock, do
not disassemble the iron. Take it to a qualified serviceman for exami-
nation and repair. Incorrect assembly might result in a risk of electric
shock when the iron is used after reassembly.
7. Close supervision is required for any appliance used by or near child-
ren. Do not leave the iron unattended while the iron is connected or on
an ironing board.
8. Burns can occur from touching hot metal parts, hot water, or steam.
Use caution when you turn a STEAM IRON upside down – there might
be hot water in the reservoir.
9. In the event the malfunction indicator goes on, the iron is not ope-
rating properly. Disconnect the iron from the electrical outlet and have
the iron serviced by qualified service personnel.
10. To avoid a circuit overload, do not operate an iron on the same
circuit with another high wattage appliance.
11. If an extension cord is absolutely necessary, a cord with an ampere
rating equal to or greater than the maximum rating of the iron shall be
used. A cord rated for less amperage can result in a risk of fire or elec-
INSTRUCTIONS
12
EN
FR
ES