TP-Link TL-WPA8630 User Manual page 9

Chapter 1 Get to Know About Your Powerline Extender
LED Button
Press and hold the button for 1 second to turn all LEDs on or off. All LEDs are on by
default. If you don't feel like being bothered by the LED light at night, press and hold
the button for 1 second to turn all LEDs off. The next morning, just press and hold the
button again to turn them on.
Pair Button
Press and hold the button for 1 second to join a powerline network. Go to To Set Up a
New Secure Wireless Network for more information.
Press and hold the button for about 8 seconds until all LEDs go off to leave the existing
powerline network.
Power Plug
The extender has a Power Plug which can connect to any (100V-240V~, 50/60Hz) power
socket.
Note:
1. Use the product in upward direction.
2. Plug the product directly into a wall socket but not a power strip.
Wall Outlet Power Strip
6