Setting up the charger
1. Plug the power adaptor cable into the underside of
the charger.
2. Plug the power adaptor into the mains wall socket and
switch the power on.
3. Install the 2 x AAA rechargeable batteries supplied into
the handset.
4. Place the handset in the charger and charge the handset
for at least 16 hours. The red
charger comes on.
Once the batteries are charged, the
the handset display.
Once the handset registers with the base, the
stops flashing.
Your BT Studio 1500 is ready for use.
Charging
light on the
icon will flash in
icon
Getting started
9