Table of Contents
Advertisement
Use the SSID "HomeConnect" and the key
4.
"HomeConnect" to register the mobile device on the
oven network.
Wait until "Network connection successful" is shown
in the display.
Touch "Connect to the app".
5.
The appliance is ready to connect to the app.
Start the app on the mobile device and follow the
6.
instructions for manual network registration.
The process for registering is completed once
"Successfully connected to the app" is shown in the
display.
Remote Start
If you want to start an oven operation using your mobile
device, you must activate remote start.
Notes
"Remote start" is only visible if the Home Connect
■
Assistant has been successfully completed.
Note that some operating modes can only be started
■
on the oven itself.
Press the menu button.
1.
Touch "Remote Start".
2.
appears in the display
C
Remote start is automatically deactivated in the
following situations:
The oven door is opened 15 minutes after remote
■
start is activated.
The oven door is opened 15 minutes after the oven
■
operation ends.
24 hours after remote start is activated.
■
When you start the oven operation on the appliance,
remote start is automatically activated. You can
therefore make changes on your mobile device or start
a new programme.
Home Connect settings
You can adjust Home Connect to suit your
requirements at any time.
In the Home Connect settings, press the
Note:
to display network and device information.
WiFi
If WiFi is activated, you can use the Home Connect
functions.
In the networked standby mode, your appliance
Note:
requires a maximum of 3 W.
Press the menu button
1.
Touch "Settings".
2.
Touch "Home Connect".
3.
Touch "WiFi" to switch the wireless module on or off.
4.
Disconnect from the network
You can disconnect your oven from the network at any
time.
If your oven is disconnected from the network, it
Note:
is not possible to operate the oven using Home
Connect.
Press the Menu button.
1.
Touch "Settings".
2.
Home Connect
en
button
l
21
Advertisement
Table of Contents
