Set The Base Ringer Volume; Set A Pbx Access Code - BT BT1600 Quick Setup And User Manual

52 Settings
There are 5 base ringer volume
levels plus Ringer Off. The
default setting is Level 3.
If you're connected to a
switchboard, you might
need to enter an access code
(e.g.9) before each number
is dialled. Your BT1600 can
store an access code which is
automatically dialled before
each number.
If you wish to revert to not
using a PBX access code, you
need to go into the PBX code
menu and delete all the digits
by selecting
Del.
to save.
1. Select Menu, scroll
2. Sounds is displayed, press
3. Ringing is displayed, press
4. The current base ringtone will play at the current
5. Press
1. Select Menu, scroll
2. Sounds is displayed, press
3. Press
4. Enter the number you want (maximum of 4 digits)
, then press
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp

Set the base ringer volume

is displayed and press
Ringing Volume, then press
volume. Use the
decrease the volume, or turn the ringer off. You will
see the volume level change on the display or Ringer
Off will be displayed if you turn the ringer off.
to save your choice. Saved will be
displayed and you will hear a confirmation tone.

Set a PBX access code

displayed and press
to display PBX Code and press
and press to save. Saved will be displayed and
you will hear a confirmation tone.
to Settings and press
until Base Settings
.
. Press
.
or button to increase or
to Settings and press
until Base Settings is
.
.
to display
.
.