Trimming Settings - Panasonic AV-HS410E Operating Instructions Manual

1. Basic operations

1-4-9. Trimming settings

1 Press the p button to light its indicator, and display the
PinP1 menu (or PinP2 menu).
2 Use [F1] to display the Trim sub menu.
3 Use [F2] to select the trimming type using the Trim item.
Off No trimming
4:3 Automatic trimming so that the aspect ratio
is 4:3.
Manual
Trimming using the value set on the Trim
Adjust sub menu.
4 Use [F3] to select the operation to be performed during
the manual setting using the Manual item.
Free
The Left, Right, Top and Bottom parameters
change independently.
However, the Left setting cannot exceed the
Right setting (and vice versa) and, similarly,
the Top setting cannot exceed the Bottom
setting (and vice versa).
Pair
The settings are changed in such a way that
the Left and Right trimming amounts and the
Top and Bottom trimming amounts are the
same. (This makes for a top-bottom and left-
right symmetry.)
5 Use [F1] to display the Trim Adjust sub menu, and use
[F2], [F3], [F4] and [F5] to set the trimming values.
Operation/
Parameter
F2/ Trimming value at
Left left
F3/ Trimming value at
Top top
F4/ Trimming value at
Bottom bottom
F5/ Trimming value at
Right right
<Trimming settings> (figure shows the default values)
Area trimmed
50
TOP (40)
0
BOTTOM (-40)
-50
33
Description of Setting range/
setting Initial value
−50.00 to 50.00/
−40.00
−50.00 to 50.00/
40.00
−50.00 to 50.00/
−40.00
−50.00 to 50.00/
40.00
Area where PinP is effective
Original size of PinP
-50 0
(-40) (40)
LEFT RIGHT
50