Kenwood KID60X16 Installation Instructions Manual page 15

installation
• Do not bend your drain hose.
• You may use the U-shaped drain hose
holder to secure your drain hose and to
avoid bending it.
Before connecting to the waste pipe,
make sure to check the waste pipe
and remove any stopper or blockage
inside, otherwise the unit may not
be able to expel the waste water
properly.
• Secure the water drain hose to the waste
pipe to avoid it coming off during the
washing process.
• The waste pipe must only be
connected to the foul drains and
not the surface water drainage
system.
• The water drain hose should be
placed between 40 cm and 100 cm
from the floor level and must not
be extended, otherwise the unit
may not be able to expel the waste
water properly.
• Please close the hydrant after
using.
U-shaped drain
hose holder
water drain
hose
15