Asus Republic of Gamers PG279QE User Manual page 20

•. Max.Refresh.Rate: allows you to select a maximum refresh rate of 165Hz
(Only for DisplayPort input). After selecting, press the
twice to activate the setting.
After reboot, test the new Max Refresh Rate by enabling it in the NVIDIA
Control Panel. If you don't see an image, disconnect the DP cable and use the
monitor OSD to try again with a safer Max Refresh Rate.
2.. Blue.Light.Filter
In this function, you can adjust the blue light filter level.
•. Level.0:.No change.
•. Level.1~4: The higher the level, the less blue light is scattered.
When Blue Light Filter is activated,the default settings of Racing Mode
will be automatically imported. Between Level 1 to Level 3, the Brightness
function is user-configurable. Level 4 is optimized setting. It is compliance
with TUV Low Blue Light Certification. The Brightness function is not user-
configurable.
Please refer to the following to alleviate eye strains:
•
•
•
•
3-2
Over Clocking Level 0
Blue Light Filter Level 1
Color Level 2
Image Level 3
Input Select Level 4
System Setup
MOVE/ENTER
Users should take some time away from the display if working for long
hours. It is advised to take short breaks (at least 5 mins) after around 1
hour of continuous working at the computer. Taking short and frequent
breaks is more effective than a single longer break.
To minimize eye strain and dryness in your eyes, users should rest the eye
periodically by focusing on objects that are far away.
Eye exercises can help to reduces eye strain. Repeat these exercises
often. If eye strain continues please consult a physician. Eye exercises: (1)
Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes
diagonal.
High energy blue light may lead to eye strain and AMD (Age-Related
Macular Degeneration). Blue light Filter to reduce 70% (max.) harmful blue
light to avoiding CVS (Computer Vision Syndrome).
Gsync mode DisplayPort 2560 x 1440@ 165Hz
ROG Swift PG279
BACK
EXIT
Chapter 3: General Instructions
( ) button
Racing Mode