The Mixer/Multiplexer Control Panel is a window within IQ for Windows that can be used to control any of the set of Crown IQ-compatible mixer/multiplexer products: the MPX-6, the SMX-6 and the AMB-5. Each of these products has several software controls in common. These include: 5 (the AMB-5) or 6 Mic/line inputs "Data"...
Page 4
2 User Labels AMB-5 The AMB-5 is two mixer/multiplexers in one unit. One mixer/multiplexer is an ambient sensing 5x1 mixer/multiplexer. It has all of the capabilities of Channel 1 of an SMX-6 plus the added feature of ambient sensing. Its custom Ambience function enables it to automatically adjust the level of its mix to match the ambient noise level.
When the input control is being affected by one or more of the Auto functions available on the SMX-6 or the AMB-5, a second "phantom" input slider may be visible that represents the net input gain at that point. That is, it reflects the input level as affected by any of the Auto gates, limiters, compressors, etc., and their relation to the Max Gain setting.
The input labels number both the mic/line inputs of all of the IQ mixer products and the expanded input sections of the SMX-6 and the AMB-5. You can use this label to copy the settings of one input channel to another channel.
Applies To MPX-6, SMX-6, AMB-5 Each IQ mixer/multiplexer has two switchable "bus" outputs (one for each output channel). They receive the exact same post-fader audio signal that the main outputs receive. They are turned on and off with the Bus controls.
Applies To SMX-6, AMB-5 The IQ-compatible mixer components, the SMX-6 and the AMB-5, contain several Auto functions that may be engaged by clicking on the Auto button at the top right of the control panel. To set up any of these...
To access the controls on any page, click on the appropriate page tab. Every Control Page will include 5 (AMB-5) or 6 (SMX-6) input sections that contain controls for signal processing prior to output. The AMB-5 allows processing prior to output for channel 1 only, while the SMX-6 allows processing prior to output for both channel 1 and channel 2.
Crown Local Net startup procedure. One of the first things to do is to decide which SMX-6 will serve as the Crown Local Net master. Being the Crown Local Net master will not affect its normal operation. After the master is selected, the Duck, Gate Count and External Functions controls should be set for each SMX-6.
Turn this control on for any SMX-6s that you want to participate in the Crown Local Net. Duck On/Off Turn this control on for all SMX-6s in a Crown Local Net that you want to respond to external Duck Priority functions.