Advanced Settings - Hawking HI-GAIN WIRELESS-300N User Manual

9. Advanced Settings

TX-Burst: Turbo Mode. When it is checked and the HWDN1 Wireless N-Adapter is
connected to an Access Point with TX-Burst function, the transmission throughput
will be improved. (Note: This only works with Access Point that supports this function)
Enable TCP Window Size : When checked, the reception speed will improve.)
Fast Roaming at ___ dBm: Will enter roaming mode when dBm reaches defined
level.
CCX 2.0: Open CCX (supports Cisco Compatible Extensions function). Check it after
making sure the Wireless AP supports it.
Turn on CCKM: Open CCKM function (Cisco Key Management).
Enable Radio Measurements: Open the function of CCK Monitor AP Channel.
Non-Serving Channel Measurements: Select and start to monitor the channels on
which the AP is not transmitting
Turn off RF: Disable wireless radio.
Turn on RF: Enables wireless radio.
Apply: Click this when finished with the settings.
Wireless mode: Select wireless
network mode (speed)
- 802.11b/g mixed: Automatically
detect 11b or 11g
- 802.11b only: Frequency only 11b
- 802.11b/g/n mixed: Automatically
detect 11b or 11g or 11n
In order to keep the connection
stable, please select [Auto] to
automatically confirm which mode
the wireless network is working.
26