Gigabyte G1.Sniper Z170 User Manual page 7

Storage Interface Š Chipset:
- 1 x M.2 Socket 3 connector (Socket 3, M key, type 2242/2260/2280 SATA &
PCIe x4/x2/x1 SSD support)
- 3 x SATA Express connectors
- 6 x SATA 6Gb/s connectors
- S upport for RAID 0, RAID 1, RAID 5, and RAID 10
* R efer to "1-8 Internal Connectors," for the supported configurations with the M.2,
USB Chipset:
Š
- 7 x USB 3.0/2.0 ports (3 ports on the back panel, 4 ports available through
the internal USB headers)
- 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through
the internal USB headers)
Chipset+ASMedia
Š
- 1 x USB Type-C
- 1 x USB 3.1 Type-A port (red) on the back panel
Internal 1 x 24-pin ATX main power connector
Š
1 x 8-pin ATX 12V power connector
Connectors
Š
1 x M.2 Socket 3 connector
Š
3 x SATA Express connectors
Š
6 x SATA 6Gb/s connectors
Š
1 x CPU fan header
Š
1 x water cooling fan header (CPU_OPT)
Š
3 x system fan headers
Š
1 x front panel header
Š
1 x front panel audio header
Š
1 x S/PDIF Out header
Š
2 x USB 3.0/2.0 headers
Š
2 x USB 2.0/1.1 headers
Š
1 x Trusted Platform Module (TPM) header
Š
1 x Thunderbolt
Š
1 x serial port header
Š
1 x parallel port header
Š
1 x Clear CMOS jumper
Š
Back Panel 1 x PS/2 keyboard/mouse port
Š
1 x D-Sub port
Connectors
Š
1 x DVI-D port
Š
1 x HDMI port
Š
1 x USB Type-C
Š
1 x USB 3.1 Type-A port (red)
Š
3 x USB 3.0/2.0 ports
Š
2 x USB 2.0/1.1 ports
Š
1 x RJ-45 port
Š
6 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker
Š
Out, Line In, Line Out, Mic In)
I/O Controller iTE I/O Controller Chip
®
Š
SATA Express, and SATA connectors.
USB 3.1 Controller:
®
port on the back panel, with USB 3.1 support
™
add-in card connector
™
port, with USB 3.1 support
™
- 7 -