JVC KW-R910BT Instruction Manual page 23

Symptom Remedy
"READING" keeps flashing. • Do not use too many hierarchical levels and folders.
• Reload the disc or reattach the USB device.
The iPod/iPhone does not turn • Check the connection between this unit and iPod/
on or does not work. iPhone.
• Detach and reset the iPod/iPhone using hard reset.
"ADD ERROR" New station creation is unsuccessful.
"SEARCH ERR"
"CHK DEVICE" Check the Pandora application on your device.
"NO SKIPS" The skip limit has been reached.
"NO STATIONS" No stations are found.
"STATION LIM" The number of registered stations has reached its limit.
Retry after deleting unnecessary stations from your
device.
"UPGRADE APP" Make sure you have installed the latest version of the
Pandora application on your device.
"CONNECT ERR" Communication is unstable.
"RATING ERR" Registration of thumbs up/thumbs down has failed.
"LICENSE ERR" You try to access from a country which Pandora is not
deliverable.
Station cannot be If "Explicit Content" in [Account Settings] is checked
selected. in the web version of iHeartRADIO, custom stations
become unavailable.
"CREATE ERR" Custom station name creation is unsuccessful.
"SAVE ERROR" Addition to the favorite category failed.
"DISCONNCTED" Check the connection to the device.
"NO SKIPS" The skip limit has been reached. Retry later.
"NO STATIONS" No stations are found.
"NOT CONNCTD" Link to the application is impossible.
Symptom Remedy
"UPDATE APP" Make sure you have installed the latest version of the
iHeart Link for JVC application on your device.
"PLS LOGIN" You haven't log in. Log in again.
"STATION NOT AVAILABLE" Broadcast from the station is over.
"STATION NOT SELECTED" No station is selected.
"STREAM ERR" Broadcast data is interrupted.
"THUMBS ERR" Registration of Thumbs Up/Down has failed.
"TIMED OUT" The request has resulted in time-out.
No Bluetooth device is • Search from the Bluetooth device again.
detected. • Reset the unit. ( 3)
Pairing cannot be made. • Make sure you have entered the same PIN code to both
the unit and Bluetooth device.
• Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again. ( 11)
"PAIRING FULL" appears. The number of registered devices has reached its limit.
Retry after deleting an unnecessary device. ( 15,
DELETE PAIR)
"PLEASE WAIT" appears. The unit is preparing to use the Bluetooth function. If
the message does not disappear, turn off and turn on
the unit, then connect the device again.
"BT DEVICE NOT FOUND" The unit failed to search for the registered Bluetooth
appears. devices during [AUTO CNNCT]. Turn on Bluetooth from
your device and connect manually. ( 15)
Echo or noise occurs. • Adjust the microphone unit's position. ( 11)
• Check the [ECHO CANCEL] setting. ( 13)
Phone sound quality • Reduce the distance between the unit and the
is poor. Bluetooth device.
• Move the car to a place where you can get a better
signal reception.
TROUBLESHOOTING
ENGLISH | 21