BenQ MS531 User Manual page 64

Hide thumbs Also See for MS531:
Table of Contents

Advertisement

9.
Replace the lamp cover by sliding it
into place.
10. Tighten the screw that secures the
lamp cover.
Loose screw may cause a bad
connection, which could result in
malfunction.
Do not over tighten the screw.
11. Restart the projector.
Do not turn the power on with the lamp cover removed.
Resetting the lamp timer
12. After the startup logo, open the On-
Screen Display (OSD) menu. Go to the
SYSTEM SETUP: Advanced > Lamp
Settings menu. Press OK. The Lamp
Settings page displays. Press
highlight Reset lamp timer and press
OK. A warning message displays asking if you want to reset the lamp timer.
Highlight Reset and press OK. The lamp time will be reset to '0'.
Do not reset if the lamp is not new or replaced as this could cause damage.
Maintenance
64
to
(a)
(b)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx532Mw533Tw533Mh534Ms521h

Table of Contents