Crown DSi 8M Operation Manual page 12

3 Installation (continued)
5. Connecting DSi 8M inputs to power amplifi er outputs:
two options
Option 1: If you have Crown DSi power amplifi ers, use six VGA
cables as shown in Figure 3.1 and Figure 3.4.
DSi 8M System Monitor
HD-15 I/O connector
OUTPUTS TO POWER AMPLIFIER INPUTS
VGA cable
DSi power amplifier
HD-15 input
Figure 3.4 Connection to Monitor the DSi Power Amplifi er Output
page 12
Option 2: Connect the amplifi er loudspeaker outputs to the DSi
8M's Phoenix input connectors I and J as shown in Figure 3.5.
Unshielded wire can be used. Section 5 gives the connector pin
assignments.
All the inputs on the rear panel are unbalanced except for the
sub woofer input.
DSi 8M System Monitor
input connector
Figure 3.5 Using Phoenix Connectors with Non-DSi Amplifi ers
DSi 8M Cinema System Monitor
CH-2 CH-1
Power amplifier outputs
Operation Manual