Bosch HMV 5051 U Installation Instructions Manual page 22

Adapting microwave blower
22
6. Using a saber or keyhole saw, cut out this area through the rear wall.
1. Remove and save the screws holding the blower motor and the blower plate. Lift
up the blower plate and put it aside.
2. Carefully pull out the blower unit and rotate 90º so that fan blade openings are
facing out the top of the microwave
1.
3. Rotate the blower unit counterclockwise 180º.
4. Gently remove the wires from the grooves. Reroute the wires through the
grooves on other side of the blower unit. Rotate blower unit 90º so that fan blade
openings are facing out the back of the microwave.
2.