Hardware Maintenance Manual
42
Figure 3. Removal steps of PCI Express Mini Card for wireless LAN (continued)
ideapad S130-11IGM/ideapad 130S-11IGM (with HDD)
Step
Screw (quantity)
M2X2mm, Phillips-head (1)
2
In step 1, unplug the jacks by using the removal tool antenna RF connector
(P/N: 08K7159), or pick up the connectors with your fingers and gently unplug
them in the directions shown by the arrows.
When installing:
• Plug the black cable (1st) (MAIN) into the jack labeled MAIN, and the grey
cable (2nd) (AUX) into the jack labeled AUX on the card.
• Make sure that the connectors are attached firmly.
b
a
a
Color
Black
Torque
2.0±0.2 kgf.cm