Table of Contents
Advertisement
Motion Detect Setup
You can configure motion detection for each channel (Camera) connected to the
DVR. To configure motion detection:
1.
From the Main Menu click ADVANCED. Then click MD (Motion Detect).
2.
Under STATUS, select ON to enable motion detection for the desired chan-
nel. Scroll down for additional channels. Note: If in the RECORD screen a
Channel is set to OFF, MOTION is also disabled for that Channel
3.
Under SENSITIVITY, select 1 through 8. The higher the number, the more
sensitive the motion detection.
4.
Under MD AREA SETUP, click SETUP. The red motion grid appears over the
selected channel in full screen.
5.
Click the blocks in the grid to enable/disable motion detection. Red=motion
detection enabled; Clear=motion detection disabled.
6.
Right-click anywhere on the screen to return to the Motion Detection menu.
7.
Click EMAIL, then select ON/OFF to turn on e-mail notification. E-mail must
be configured. See manual for details.
8.
Click APPLY. Click OK in the confirmation window.
9.
Click EXIT in all menus until all windows are closed.
NOTE: You can disable the MD buzzer in the Alarm Setup menu.
step 7... playback
PLAYBACK Mode
View recorded video on the system through the Search Menu. To begin play-
back:
1.
Right-click anywhere on the screen and select VIDEO SEARCH from the
Quick Access Menu. The Search Menu opens.
NOTE: When you first open the Search Menu, it displays the current month
and date.
2.
Click PLAY to playback the last minute of recorded video (Quick Search) OR
Under CHN select a specific channel or select ALL.
3.
Under DATE, enter a date using the Virtual Keyboard (mouse only).
4.
Click SEARCH. Recorded events on the system appear in red (alarm events—
includes both alarm and motion events) and green (normal recording).
5.
Click a date in the Month Grid to search for video files.
6.
Click a time block in the Hour Grid to view the video. Playback begins.
7.
Move the mouse slightly to display the on-screen play back controls. You
can also use the playback control with buttons on the remote control or front
panel of the system.
On-screen Playback Controls
8.
Under RECORD STATE, the system shows recorded events in a Month
Grid and a Time Grid. The selected day of the month will be outlined in
red. Green=normal recording; Red=alarm recording (includes both alarm
and motion events). Click a date in the month grid to view recorded video
files for that selected date in the hour grid.
initial setup
Basic operation
On-screen Playback Controls
To use the on-screen playback controls:
1. Click the VCR-like controls to play, pause, fast forward, rewind, and
slow down playback.
2. Drag the slider to adjust the volume (audio capable camera required,
not included). Select the box to mute the audio.
3. Click X to quit playback and return to the Search menu.
Page 11
Motion Detect Menu
Motion Detect Grid
Record/Search Menu
Record State
Month Grid
Hour Grid
Advertisement
Table of Contents
