Stepping Motor (Hopping) - Oki OKIPAGE 10ex Maintenance Manual

3.3.1

Stepping Motor (Hopping)

(1) Turn the printer power switch off, pull out the AC cord from the outlet. Remove the printer
off High Capacity Second Paper Feeder.
Take the paper cassette assy 1 out of High Capacity Second Paper Feeder.
(2)
Remove six screws 2 and remove the upper plate 3. Remove two screws 5 and remove
(3)
the hopping frame assy 6.
(4) Remove the front cover assy 4 off the guide boss on the guide L (2nd) assy 7 by bending
the guide L (2nd) assy 7 in the direction of arrow shown in the magnified view below.
Pull the sheet guide assy 8 in the direction of arrow a and also push in the direction of
(5)
arrow b to unlock the notch, and bring the sheet guide assy 8 in the direction of arrow
c to remove the sheet guide assy 8.
7
b
2
2
C
c
a
Notch
4
Guide Boss
3
2
5
0
(See Detail A)
A
F - 10
8
5
6
1
4