Sharp Aquos LC-46LE700X Operation Manual page 26

Watching TV
Manual setting for each channel (continued)
Sound system (Broadcasting system)
Press a / b / c / d to select the channel you
1
want to edit, and then press ENTER.
• The selected channel information displays.
Press a / b to select "Sound sys.", and then
2
press ENTER.
• Receivable sound systems (Broadcasting systems)
are listed.
Sound system menu
Search
Fine [179.25]
Colour sys. [Auto]
Sound sys. [B/G]
Label [SAT.1]
Skip [Off]
Lock [Off]
Press a / b to select the optimum sound
3
system, and then press ENTER.
Labelling channels
When a TV channel sends its Network Name, the auto
installation detects the information and assigns a name
to it. However, you can change individual channel
names.
Press a / b / c / d to select the channel you
1
want to edit, and then press ENTER.
• The selected channel information displays.
Press a / b to select "Label", and then press
2
ENTER.
• The alphabet and numbers are listed.
Search
Fine [179.25]
Colour sys. [Auto]
Sound sys. [B/G]
[SAT.1]
Label
Skip [Off]
Lock [Off]
Press a / b / c / d to select each character of
3
the new name for the channel, and then press
ENTER.
Repeat until the name is fully spelt out.
4
• The name can be 5 characters or less.
• When you want to set a channel name of less
than 5 characters, select "END".
24
Sound system settings
B/G
D/K
I
Labelling menu
Broadcasting station name settings
S A T . 1
A B C D E F G H I J CLEAR
K L M N O P Q R S T BACK
U V W X Y Z + . _
0 1 2 3 4 5 6 7 8 9 END
Skipping channels
Channels with "Skip" set to "On" are passed over
when using CH r / s even if selected while watching
the image from the TV.
Press a / b / c / d to select the channel you
1
want to edit, and then press ENTER.
• The selected channel information will be displayed.
Press a / b to select "Skip", and then press
2
ENTER.
• Skip menu displays.
Search
Fine [179.25]
Colour sys. [Auto]
Sound sys. [B/G]
Label [SAT.1]
Skip [Off]
Lock [Off]
Press a / b to set "Skip" to "On", and then
3
press ENTER.
Setting the child lock
You can block the viewing of any channel.
Press a / b / c / d to select the channel you
1
want to edit, and then press ENTER.
• The selected channel information will be displayed.
Press a / b to select "Lock", and then press
2
ENTER.
• Child lock menu will be displayed.
Search
Fine [179.25]
Colour sys. [Auto]
Sound sys. [B/G]
Label [SAT.1]
Skip [Off]
Lock [Off]
Press a / b to set "Lock" to "On", and then
3
press ENTER.
NOTE
• See page 28 for setting a password.
• If "Lock" is set to "On" for a channel, "Child lock has been
activated RETURN: Input password" is displayed when
you select the channel, and the image and sound of the
channel is blocked.
• When pressing RETURN while "Child lock has been
activated RETURN: Input password" is displayed,
password input menu will be displayed. Inputting the
correct password lifts the child lock temporarily until the
power is turned off.
Skip menu
Channel skip settings
Off
On
Lock menu
Applies child lock to this channel
Off
On