Force Cooling Function; Sleep Mode; Auto Restart Function; Turbo Mode - Midea MSF3-07CRN2 Service Manual

Table of Contents

Advertisement

11.10 Force cooling function

11.10.1
Select forced cooling function with the forced cooling button or the switch
11.10.2
The compressor is unconditionally turned on, after 30 minutes cooling operation whose fan mode is
set as low, the A/C operates at the DRY mode with a set temp. of 24℃
11.10.3
All protections of remote control cooling are available at forced cooling operation
11.10.4
Forced Auto function
Select forced auto function with the forced auto button or the switch.
In forced auto status the A/C operates at remote control mode with a set temp. of 24℃

11.11 Sleep mode

11.11.1
The sleep function is available at cooling, heating or auto mode
11.11.2
Cooling:
The set temperature rise 1℃ per hour. Two hours later, the set temperature will maintain as a constant and the
fan speed is kept at low speed.
The total time is 7 hours, after 7 hours the unit stops
11.11.3
Heating:
The set temperature decrease 1℃ per hour. Two hours later, the set temperature will maintain as a constant and
the air circulation is kept at low speed (Anti-cold function takes precedence over all).
The total time is 7 hours, after 7 hours the unit stops
11.11.4
Auto:
After an hour running under economic mode, the set temp will rise 1℃,if it is under cooling mode; the set temp
will decrease 1℃,if it is under heating mode; the set temp will be changeless, if it is under fan-only mode; the
condition will be the same after the air conditioner running under economic mode after 2 hours, and during the
next time the set temp do not change. The total time is 7 hours, after 7 hours the unit stops.

11.12 Auto restart function

In case of a sudden power failure, this function automatically sets the unit to previous settings before the power
failure when power returns

11.13 Turbo mode:

In cooling mode, when pressing the Turbo button on the remote controller, the unit will enter Turbo mode with
ultra-high speed and reach the set temperature more quickly.
After running 20 minutes in turbo mode, the indoor fan will automatically recover the preset speed.
34
Service manual

Advertisement

Table of Contents
loading

Table of Contents