The Process Of Assembling
No.
1
2
3
4
Process
Assemble the coupling
Assemble the new clutch boss
ass'y
Assemble the pulley
Assemble the spring washer
Assembling 1
Notice
Check the uneven face of
coupling is assembled upward
- Push in the clutch boss ass'y
with rotating on the clockwise
direction.
- After assembling, rotate on the
clockwise more 2~3 teeth and
pull out the pulley shaft upward
If there was plain washer, you
have to assemble plain washer
the first and then assemble
spring washer
THE REPAIR
19