Daikin MC70LVM Operation Manual page 11

4
Attach the pleated fi lter.
Make sure to set the prefi lter (green) and the pleated fi lter
(front: white, rear: blue) in place.
If you operate the unit without them, the unit may be
damaged.
1) Fit the holes (5 each on the right and left) of the pleated
fi lter to the fi xing lugs (5 each on the right and left) of the
deodorising catalyst unit.
Projection
(5 each on right and left)
Pleated fi lter
Face the white
side to the front.
Deodorising catalyst unit
2) Insert the pleated fi lter underneath the tabs (4 locations)
at the top and bottom of the deodorising catalyst unit.
Top and bottom
tabs (4 locations)
• Unit performance drops if the pleated fi lter is attached
backward.
5
Attach the deodorising catalyst unit.
• Holding the deodorising catalyst unit by the handles, fi t the
projections into the grooves (4 locations) at the bottom of
the main unit and press the deodorising catalyst unit into
the main unit.
Handles
1)
Fit here.
Deodorising catalyst unit
Holes
(5 each on right and left)
2) Press the deodorising
catalyst unit until you
hear clicking sound.
6
Attach UNIT1.
• Holding UNIT1 by the handles, fi t the projections into the
grooves (2 locations) at the bottom of the main unit, and
press UNIT1 into the main unit.
Handles
1)
Fit here.
UNIT1
7
Attach the front panel.
• Fasten the top hooks (2 locations) of the front panel to the
top grooves (2 locations) of the main unit and then close
the front panel.
Top grooves
(2 locations)
1) Fasten the hooks.
Front panel
[View from above]
If the front panel is improperly set, the safety switch
may be activated. Operation may not start.
2) Press UNIT1 until you
hear clicking sound.
Top hooks
(2 locations)
2) Press the front panel
until you hear clicking
sound.
► Page 16.
10