Page 1
2B-LP POWER AMPLIFIER OWNER’S MANUAL UPDATED 2007-02-14...
Page 2
Bryston authorized dealer to qualify for warranty service. The warranty is transferable from the original owner to a subsequent owner as long as a copy of the bill-of-sale from the original authorized Bryston dealer accompanies the re-sale. The copy of the bill of sale to any subsequent owner need ONLY include the Name of the Bryston Authorized Dealer and the Model and Serial number of the Bryston product The warranty will only be honored in the country of the original purchase unless otherwise pre-authorized by Bryston.
OUTPUT CONNECTORS The 2B-LP is equipped with four binding post terminals (2 red, 2 black) which can accept either standard banana plugs or bare wire. Refer to the rear panel hook-up diagram and to the descriptions of DUAL (stereo) and MONO operation for details on how to connect speakers to these terminals.
Page 4
REMOTE ON/OFF CONTROL (optional) Some 2B-LP models come equipped with a remote on/off control feature. This feature allows the amplifier to be turned on and off by application of a control voltage of 12V (AC or DC) at 5mA. The control voltage is connected via the dual spring loaded terminal block located beside the “Remote/Local”...